The specific steps of polishing the Aluminum Wheel Polishing Machine :
First of all, before the polishing: before starting to polish, you need to clean the surface of the polished object, especially on the surface of the stain, it is best to use a detergency cleaning agent to clean the surface of the car, so as not to grind There are new traces in the middle.
Secondly, if there are coarse particles on the surface of the car, it should be wrapped in a rubber pad with 600# to 1000# water sandpaper before polishing. The polishing machine should be polished to a flatness. Be careful not to excessively rub to avoid forming a wear-through paint layer. After these are completed, the grinder is used together with the coarse abrasive paste for processing. The mechanical polishing technique is used. After the polishing and polishing is completed, the abrasive polishing paste is further wiped off, and the mirror surface treatment agent is thrown away to remove the marks left by the coarse grinding to achieve The mirror finish of the paint film.
Initially, the inspection: a newspaper can be found, and the polishing machine is placed on the surface of the paint. If the polishing is good, you can see the words in the newspaper through the reflection of the sun, which means that the paint is very well. Sufficient, the surface layer is also lubricated like a mirror! Another method: use the bright paper on the outer casing of the cigarette case to rub the car body. If you find that there is a feeling of unevenness, it means that the polishing is not done!information .
about aluminum wheel polishing machine : https://www.zhongyun-machine.com/product/wheel-polishing-machine/